Autogate Shah Alam – Autogate Remote Control Not Working

LATEST NEWS 

Autogate Shah Alam – Autogate Remote Control Not Working

Hello everyone. Today we handled another autogate remote control repair job in Shah Alam. As we always mention, we receive autogate remote repair requests almost every day. One of our recent customers was Mr. Haikal from Section 9, Shah Alam, who was having trouble with his autogate remote control.

According to Mr. Haikal, he only had one remote control left to operate his autogate. He also had a wall switch inside the house that could open and close the gate. The problem was that the autogate switch was still working normally, but the remote control could no longer operate the gate.

Whenever customers contact us regarding a remote control problem, we usually ask them to replace the remote battery first. In some cases, the battery is already weak or completely dead, causing the remote to stop working. However, if the remote still cannot function after replacing the battery, the issue may be caused by a faulty autogate receiver or control board.

In Mr. Haikal’s case, he changed the battery and managed to get the remote working again, but it was very difficult to use. He had to press the button many times before the gate would respond. Because of this, he requested our technician to inspect and repair the problem.

Before visiting the customer’s house, we always provide an estimated repair cost so the customer can understand the possible budget involved. Once the customer agrees, we arrange a site visit. Our technicians bring common autogate spare parts such as control panels, transformers, batteries, remote controls, receivers, and autogate arms. This allows us to solve most problems on the spot without making customers wait for additional parts.

Our goal is simple: get your autogate working normally again as quickly as possible, so you can enjoy convenient and reliable operation without stress.

Servis Baiki Autogate Cepat Di Shah Alam
Servis Baiki Autogate Cepat Di Shah Alam

Old 330MHz Autogate Receiver Failed

After arriving at the site and performing a full inspection, we found that the old 330MHz autogate receiver had failed.

The customer was still using an older 330MHz remote system, which typically has a shorter operating range compared to newer systems. As the receiver becomes old and worn out, its ability to detect signals becomes weaker. Eventually, the remote may stop working completely even if the battery is new.

This is a common problem for older autogate systems that have been operating for many years.To solve the issue, we recommended upgrading to a newer 433MHz autogate remote system. The 433MHz system provides a stronger and more stable signal, allowing users to operate the gate from a much greater distance.

We replaced the old receiver with a complete 433MHz receiver set and supplied three new remote controls. After installation, the customer tested the system and immediately noticed the difference. The gate responded quickly, and there was no longer any need to stand close to the gate before pressing the remote.

Now the autogate opens and closes smoothly and reliably. The customer can operate the gate comfortably even during rainy weather or at night. If your autogate remote control is not responding properly, feel free to contact us for professional troubleshooting and repair services.

Autogate Remote Repair Shah Alam
Autogate Remote Repair Shah Alam

Contact an Autogate Specialist in Shah Alam

For fast and effective autogate repair services, it is important to choose experienced technicians who understand autogate systems. At Kedai Autogate, we use only new and genuine spare parts to ensure long-lasting performance. We specialize in repairing and servicing various types of autogate systems, including swing arm autogates and folding arm autogates.

We support many popular autogate brands such as Tronica, KRON, FBM, E8, Dnor 212, Dnor 712, Dnor 212K, OAE 333A, DCMoto DC925, DCMoto DC975, G-Force, and many others.
Our services include autogate remote repair, autogate control panel repair, autogate installation, autogate wheel replacement, autogate arm replacement, and general autogate troubleshooting.

If you need assistance with your autogate, contact Jacky at 018-207 9198 for professional advice and repair services.

WhatsApp: www.wasap.my/60182079198
YouTube: https://youtu.be/fm2Itj0Bsg